Stainless steel plate European style box type substation

YBP (M) -12/0.4kV stainless steel plate European style box type substation is a design scheme that installs high and low voltage switchgear, distribution transformers, etc., and reasonably discharges them in an outdoor enclosed metal casing. The shell of the European style box type substation is made of stainless steel plate as the skeleton, and the partition and door panels are also made of stainless steel plate and sprayed with anti-corrosion paint. Internally installed with lighting fixtures, high-power fans, temperature controllers, etc., to ensure suitable indoor temperature and facilitate maintenance.

advantage

1. The stainless steel plate shell has a high level of protection and strong corrosion resistance, which can effectively prevent small animals, dust, and extend its service life.

2. The European style box type substation is designed with a compact structure and a small footprint, effectively saving costs.

3. All equipment in the box type substation is installed, debugged, and tested by the manufacturer, and can be used by connecting the incoming and outgoing cables on site, reducing on-site workload.

4. Low cost, box type substation saves civil engineering costs, labor costs, and time costs, with less workload and short construction period.

purpose

Stainless steel prefabricated box type substations are suitable for use in three-phase AC systems with a rated voltage of 10/0.4KV, as well as for line and distribution of electrical energy. Due to its sturdy shell and strong protective ability, it is commonly used in municipal roads, railways, highways, residential communities, schools, hotels, mines, factories and enterprises, oil and gas fields, and wind power stations.

environment

Environmental temperature: upper limit+45 ℃, lower limit -35 ℃

● Relative humidity not exceeding 90%

● Altitude not exceeding 2500m

● Ice coverage not exceeding 10mm

● Wind speed not exceeding 34m/s

● Earthquake intensity not exceeding level 8

● Installation inclination not exceeding 5 degrees

● There is no risk of fire or explosion, severe pollution, chemical corrosion, or drama

Places with strong vibrations

◇◇◇◇   Detailed description ◇◇◇◇

Detail description

01

Appearance of stainless steel plate box transformer

The outer casing of the stainless steel plate box type substation is made of stainless steel, with a stable structure, good sealing, and reserved ventilation windows, suitable for harsh environments.

02

Stainless steel plate box transformer high voltage chamber

The high-voltage chamber of the stainless steel plate box type substation is usually equipped with high-voltage metering devices, high-voltage incoming cabinets and high-voltage outgoing cabinets, which can also be configured according to customer needs.

03

Stainless steel plate box transformer room

The transformer room of a stainless steel plate box type substation often uses dry-type transformers and oil-immersed transformers as the main transformers, which are respectively connected to the high-voltage appearance cabinet and the low-voltage metering cabinet.

04

Stainless steel plate box transformer low-voltage chamber

Install low-voltage metering cabinets, low-voltage incoming cabinets, low-voltage outgoing cabinets, and low-voltage capacitor cabinets in the low-voltage room of the stainless steel plate box type substation. Other functional devices can also be installed according to requirements.