Product Overview

The GCK (L) system low-voltage withdrawable switchgear is suitable for all power generation, distribution, and usage scenarios, such as power systems, petrochemicals, industrial and mining enterprises, civil buildings, and so on.

The cabinet structure used in the GCK (L) system is flexible in assembly, and different standard components can be installed inside the cabinet to meet various usage requirements. The withdrawable unit adopts aluminum alloy sliding guide rails and spiral propulsion mechanism, with obvious working position, easy and reliable operation.

This product complies with standards such as IEC60439-1, GB7251.1-2013, GB7251.12-2013, and JB/T9661-1999. The installation and connection of the system are carried out in accordance with the IEC364 standard.

Usage conditions

The ambient air temperature shall not exceed+40 ℃, not be lower than -5 ℃, and its average temperature shall not exceed+35 ℃ within 24 hours.

Weather conditions, clean air, and relative humidity not exceeding 50% at a maximum temperature of+40 ℃. Higher relative humidity is allowed at lower temperatures.

Altitude ≤ 2000m.

This product is suitable for transportation and storage processes at temperatures ranging from -25 ℃ to+55 ℃, and can reach+70 ℃ in a short period of time (not exceeding 24 hours). The device should not operate at these extreme temperatures

Suffering from any irreparable damage and should be able to function normally under normal conditions.

If the above usage conditions cannot be met, the user should propose to the manufacturer and negotiate a solution when placing an order.

Model meaning

Meaning of GCK low-voltage withdrawable switchgear model

technical parameter

Technical parameters of GCK low-voltage withdrawable switchgear

The basic part of the GCK (L) system is a profile skeleton with 20mm interval modular holes for GCK low-voltage withdrawable switchgear, and all frame parts are maintenance free.

The GCK (L) system is a fully enclosed enclosure with a protection level of IP32. The bottom of the cabinet provides a bottom plate, and the cable outlet can be equipped with flame-retardant and insulated flange plates. The door panel and outer shell can be equipped with single/multiple ventilation openings as needed, and the top plate is fully ventilated.

Design with high current units and low current multi loop units; The small doors of two drawers on the same floor in the same cabinet are independent and do not interfere with each other; Compact structure, flexible assembly, reasonable layout, neat arrangement, and small footprint; Solid structure, reliable interlocking, high safety, and complete functions; Easy to operate, good interchangeability, and high short-term withstand current; It has good compatibility and can be assembled into both GCL power centers and GCK motor control centers, as well as distribution devices for metering, lighting, power compensation, and other purposes.